Arbiter Fuzz Face … Shipping is $3.50. (Unlike most effects that came after, germanium PNP transistors require a negative supply. The layout also uses a 10K trimpot on the collector of Q2 so that that biasing can be adjusted precisely...around -4.5VDC to -5VDC. This is the PCB for a guitar Fuzz pedal. Does not come with any other parts.What is the difference between Synthrotek's two fuzz pedals: Face the Fuzz and the Arbiter Fuzz Face Clone?

This is the FF-XS PCB only. Please see the Bill of Materials link below to find out what parts you will need to complete your build.It's the same PCB either way, but each way has slightly different components, different sized cases and a different Bill of Materials.Power on your pedal and plug a cable into the input jack. Fuzz Face DIY PCB Guitar Effect; Fuzz Face DIY PCB Guitar Effect. Description Additional information Reviews (0) Description. The first is a charge pump allowing -9V operation from a normal +9V supply, which allows it to play nice with other pedals and standard power supplies. We test all of our AC128s for optimum gain and leakage current so that they are guaranteed to bias properly and sound great! Qty: Add to Cart. The Circuit: The circuit follows the original Fuzz Face (positive ground) signal path design: The pedal uses a double PNP transistor stage and a feedback network.

Does not come with any other parts.

We designed the Face the Fuzz with a few key changes to make it more useful to the modern musician: a wider frequency response, the ability to daisy-chain the power with a 1 Spot, and the option to use temperature-stable Silicon transistors.The Arbiter Fuzz Face Clone and the Face the Fuzz circuits work fantastically with our hand-tested and selected premium AC128 NOS PNP transistors.

Qty Available: 30. Customers must source components and assemble themselves.

Add to Wishlist; Add to Favorites; Quick Overview. Fuzz Face Step 1 of 4 This is the Fuzz Face, the legendary fuzz distortion pedal. Fuzz Face PCB quantity. If it’s fed a low-impedance signal (e.g. We choose lower gain transistors for Q1 and higher for Q2 according to our strict standards.

Otherwise, we recommend you ignore this PCB mask and buy the Ready-to-Solder Printed Circuit Board or Complete Kit from the links below. The pcb dimensions: 43x26mm.

Default sorting Sort by popularity Sort by latest Sort by price: low to high Sort by price: high to low View: This pickup simulator was invented by The pickup simulator won’t provide the same interactivity with the guitar’s tone & volume as if it was connected directly, but it will help retain the tonal character. Basic circuit can use many NPN transistors for experimentation. Feel free to ask any questions. Quality PCB: 1.6mm FR4 printed circuit board with plated pads for easy soldering. Be assured that you will be playing a premium product that takes the guess work out of Germanium transistor testing.When selecting silicon transistors, be aware that the circuit can self-oscillate when at full volume and and full fuzz.Attention: This is just the PCB! If you don’t want to use the trimmer, here is the SBE R5 – GGG R5 (may not be needed if you use R5T trimmer)The addition of a charge pump on the input power, gives you the ability to daisy chain power to your PNP Positive ground pedal with all your other negative ground pedals!

The ready-to-solder PCB for he Fuzz Face Replica. Without entering the mathematics that describes precisely why, apparently ,, for that standard resistor values that you'll end up finding within the Fuzz Face circuit, many people such as the resulting seem when Q1 includes a gain of roughly 70 to 90 and Q2 an increase of roughly 120 to 140. Fuzz face is really a simple circuit design, as you can already tell by the number of components of the circuit: 4 resistors, 3 capacitors and 2 transistors! We test all of our AC128’s for optimum gain and leakage current so that they are guaranteed to bias properly and sound great!

This is a follow up to my video on using a breadboard to build your own Fuzz Face circuit. We designed the Face the Fuzz with a few key changes to make it more useful to the modern musician: a wider frequency response, the ability to daisy-chain the power with a 1 Spot, and the option to use temperature-stable Silicon transistors.When selecting Germanium transistors, know that all versions of the Arbiter Fuzz Face Clone and the Face the Fuzz circuits come with hand-tested and selected premium AC128 NOS PNP transistors. The 20K trim pot is used to dial in this value. The PCB dimensions are 4.8cm by 3.2cm. The Face the Fuzz is a modern take on a classic sound, modeled after the Dallas Arbiter Fuzz Face but with some important upgrades and modifications.

Auction includes PCB and parts list. 69er-Fuzz docs: Face 69er docs. For the circuit to be optimally biased, the collector of Q2 needs to be at 4.5 volts. See the Charge Pump Wrapper below to get your positive ground pedal on a common power supply with all your other pedals.The Germanium Transistor version and The NPN Silicon Transistor version layouts both have a 10k trimmer (R5T) that is not shown in the schematic. All you need to do is connect your leads to a ground on the PCB and the collector of Q2 to get this reading. The Sunface is a Fuzzface slightly modified. Both were made with high gain silicon transistors and sounded dreadful (IMHO). Footprint for CIC footswitch. 1.5 that was released earlier in the year, but its association with Jimi Hendrix led to its own fame and prominence, and today it’s the better-known circuit of the two.

(When connecting the Arbiter Fuzz Face Clone circuit to your multimeter as shown in the photos below, your meter will read -4.5V.) The PCB dimensions are 4.8cm by 3.2cm. $8.00. The layout also uses a 10K trimpot on the collector of Q2 so that that biasing can be adjusted precisely...around -4.5VDC to -5VDC.